Enamel Commendation Bars

Enamel style commendation bars. Order by number shown in image.

These are samples of some custom style enamel bars. The base color (silver or gold) and the section colors are changeable, if you don't specify these colors, we will assume you want the same as pictured. Otherwise, pick the style you like and you can change either gold or silver for die and be filled with your choice of color. Allow up to 6 weeks for delivery.

Finally, an easy way to wear your enamel commendation bars that are 1-3/8" wide by 3/8" tall. These can also be used with our ADA plates for easier wear.

Finally, an easy way to wear your enamel commendation bars that are 1-3/8" wide and 3/8" tall. These can also be used with our ADA plates for easier wear.

Finally, an easy way to wear your enamel commendation bars that are 1-3/8" wide and 3/8" tall. These can also be used with our ADA plates for easier wear.

Makes mounting more than one enamel commendation bar easier. Put your bars on this plate and then you only have to put one thing on your uniform.

9-11-01 Black Enamel Bar

NEW! Plate to hold Enamel Commendation Bars. All in one, you only have to attach the plate to your uniform, not all of the individual awards. Call with questions!

Enamel Bar Plate Holder - 2 Row can be worn with from 2 - 6 Commendations, depending on how you mount them, 1, 2 or 3 across. Make note on Comments section when ordering.

Enamel Bar Plate Holder - 1 Row can be worn with from 1-3 Commendations, depending on how you mount them, 1, 2 or 3 across. Make note on Comments section when ordering.

To create a custom fit for wearing enamel commendations, we’ve designed a flexible, “do it yourself” system that you can customize to your needs. The system is designed to mount your enamel bars one of two ways, either remove all clutch/fasteners from back of your bars to mount with included heavy duty mounting tape, or push the points through the supplied plastic piece and fasten on the back. A clutch pin style backing is also included for applying to the backside of your configuration, for attaching to your uniform. In stock, can ship today!

Items Included in each kit: • Flexible plastic piece in one of 3 sizes, 5.25” x 2” (small), 5.25” x 3” (medium) and 5.25” x 4” (large). (Other sizes available upon request.) • Mounting Tape (11” small, 16” medium or 21” large.) • Adhesive Double Clutch with Military Style Clasps. • Adhesive Single Clutch with Military Style Clasp.

Instructions: First lay out the configuration of awards, in order of precedence, on top of the included plastic piece. Trace the configuration. Slide bars off and cut it with regular household scissors or an Exacto knife. Now you have a “plate” to work with. If you’re using the mounting tape (suggested), cut supplied tape to just slightly smaller than the back of each bar and apply to them. Then, after removing the protective coating, carefully apply them to cut plastic piece, working bottom to top, left to right. Then apply the clutch back fastener on the back at a point middle or higher so it hangs correctly on your uniform (if you have lots of rows, you might want to use the single clutch (included) near top/middle to keep taller configurations from falling forward. Now you have one full piece to put on and take off of your uniform, all tightly put together.